HOMETechnical movie clip

Technical information provision

Technical video clips can be seen in Yoshikawafs technical information magazine. Discharging conditions of materials that are often difficult to handle due to such properties as being prone to bridging, lumpiness, fibrousness or sludge, as well as specifications of special feeders, are explained in an easy-to-understand video format.
Since our first electronic publication in 2003, more than 200 video clips have been posted, and the magazine is updated when needed.

tip movi contact

TMC List

Emission of aramid fiber

No.206

Emission of aramid fiber

Source is easily tangled and difficult to handle

Time:00:23 Update:Jan 10, 2017

Feeding Zeolite

No.205

Feeding Zeolite

Potential application for adsorbent

Time:00:23 Update:Jan 14, 2014

Mini Ace

No.204

Mini Ace

Renewal

Time:00:38 Update:Jan 10, 2014

Coal Feeder

No.203

Coal Feeder

Specialized feeder for coal

Time:00:16 Update:Jan 10, 2014

Wet molding sand

No.202

Wet molding sand

Raw material that increases bridging property by humidification

Time:00:21 Update:Jun 10, 2013

Discharging wet sand grain

No.201

Discharging wet sand grain

Poor flowability characteristics

Time:00:22 Update:Jul 11, 2012

Powder leaking test in atmospheric pressure

No.200

Powder leaking test in atmospheric pressure

Testing 50,000 times and continuing

Time:00:36 Update:Jun 29, 2012

Hydrated lime

No.199

Hydrated lime

Difficult to handle material

Time:00:19 Update:Jun 25, 2012

black pigment

No.198

black pigment

Light and bridging property

Time:00:23 Update:May 30, 2012

Opening and closing damper attached to CF-Σ

No.197

Opening and closing damper attached to CF-Σ

It can be disassembled and cleaned by one person.

Time:00:20 Update:May 22, 2012

Discharging fumed silica

No.196

Discharging fumed silica

Fine powder with lightweight material stirred up

Time:00:20 Update:Apr 24, 2012

Discharging Silicic acid

No.195

Discharging Silicic acid

The material has the both good flowability and bridging property.

Time:00:23 Update:Apr 12, 2012

Discharging construction waste

No.194

Discharging construction waste

The material characteristic tends to be bridging.

Time:00:20 Update:Mar 30, 2012

Discharging ceramic powder

No.193

Discharging ceramic powder

The material has free-flowing property.

Time:00:28 Update:Mar 15, 2012

Discharging shredded flexible container bag

No.192

Discharging shredded flexible container bag

Light and bridging property

Time:00:27 Update:Feb 23, 2012

Discharging bean-curd refuse

No.191

Discharging bean-curd refuse

Food residue

Time:00:26 Update:Feb 7, 2012

Weighing system of minimum scale 0.1 g

No.190

Weighing system of minimum scale 0.1 g

Increased accuracy in a small amount

Time:00:28 Update:Jan 26, 2012

Phenol resin flake

No.189

Phenol resin flake

Non-uniform shape

Time:00:26 Update:Dec 27, 2011

Aggregated terephthalic acid

No.188

Aggregated terephthalic acid

High hardness with lumpy and flaky material

Time:00:20 Update:Dec 21, 2011

Discharging limestone

No.187

Discharging limestone

Granular and high abrasion property

Time:00:26 Update:Nov 26, 2011

Polyacrylic acid

No.186

Polyacrylic acid

The material has high adhesion and free flowing property

Time:00:22 Update:Nov 22, 2011

Ammonium perchlorate

No.185

Ammonium perchlorate

Powder is added the water.

Time:00:28 Update:Oct 31, 2011

A small amount of discharging in the hazard area is possible.

No.184

A small amount of discharging in the hazard area is possible.

Loss-in-weight MD with explosion-proof

Time:00:06 Update:Oct 26, 2011

Mixed flocculant

No.183

Mixed flocculant

Circle Feeder for preventing segregation

Time:00:31 Update:Sep 29, 2011

Discharging Carbonate

No.182

Discharging Carbonate

Heavy bulk density with hygroscopic property

Time:00:32 Update:Sep 13, 2011

Discharging JIS test powder

No.181

Discharging JIS test powder

Ultra small amount of test

Time:00:40 Update:Aug 27, 2011

Discharging pulverized carpet

No.180

Discharging pulverized carpet

Strong compaction characteristic

Time:00:26 Update:Aug 12, 2011

Simplified sanitary hopper

No.179

Simplified sanitary hopper

Upgrading sanitation improvement

Time:00:16 Update:Jul 22, 2011

bagasse

No.178

bagasse

High bridging property

Time:00:29 Update:Jul 12, 2011

Feeding to extruder for recycle material

No.177

Feeding to extruder for recycle material

The feed rate is controlled without rotational controlled system.

Time:00:25 Update:Jun 29, 2011

Discharging pulverized pet

No.176

Discharging pulverized pet

Stable feeding of amorphous material is suitable for CircleFeeder.

Time:00:24 Update:Jun 21, 2011

Discharging mixture of phosphoric acid

No.175

Discharging mixture of phosphoric acid

Mixed powder with easy to segregate

Time:00:25 Update:May 24, 2011

rice straw

No.174

rice straw

Material has bridging property

Time:00:27 Update:May 7, 2011

Glass fiber

No.173

Glass fiber

Extra fine and aciculated with easily tangled

Time:00:26 Update:Mar 8, 2011

Discharging rice husk

No.172

Discharging rice husk

Husk of rice ear

Time:00:31 Update:Feb 20, 2011

Discharging corn starch

No.171

Discharging corn starch

Compressible property and poor flowability

Time:00:16 Update:Feb 5, 2011

Discharging test of bamboo fiber

No.170

Discharging test of bamboo fiber

Fibrous row material

Time:00:24 Update:Jan 20, 2011

Discharging test of fly ash

No.169

Discharging test of fly ash

Fine powder and very good flowability.

Time:00:29 Update:Dec 20, 2010

Discharging woody biomass

No.168

Discharging woody biomass

Raw material of biomass power

Time:00:30 Update:Dec 5, 2010

Discharging desulfurizing agent

No.167

Discharging desulfurizing agent

High free flowing material

Time:00:24 Update:Nov 20, 2010

Mixed garbage (waste)

No.166

Mixed garbage (waste)

Material has a tendency to be bridging.

Time:00:42 Update:Nov 5, 2010

Cotton

No.165

Cotton

High bridging property

Time:00:26 Update:Oct 12, 2010

Trace range 1g/hr

No.164

Trace range 1g/hr

Discharging test with the Micro Discharger

Time:00:19 Update:Sep 27, 2010

Dried sludge

No.163

Dried sludge

Good flowability and granular material by some moisture content

Time:00:19 Update:Sep 10, 2010

Clinker

No.162

Clinker

Hardness spherical shape and wide particle size distribution of property

Time:00:27 Update:Aug 25, 2010

Sealing material

No.161

Sealing material

Lightweight, adhesion, consolidation property

Time:00:29 Update:Aug 10, 2010

Sodium bicarbonate

No.160

Sodium bicarbonate

High accuracy and a small amount of feeder Micro Discharger

Time:00:29 Update:Jul 26, 2010

Circle Feeder<R> with air motor type

No.159

Circle Feeder with air motor type

Appropriate motor for explosion-proof area

Time:00:21 Update:Jul 8, 2010

High accuracy and a small amount of feeder

No.158

High accuracy and a small amount of feeder

Micro Discharger

Time:00:12 Update:Jun 8, 2010

Flour

No.157

Flour

Material has bridging property

Time:00:29 Update:May 10, 2010

RPF

No.156

RPF

High-calorie with low cost of RPF

Time:00:36 Update:Apr 21, 2010

The cut plastic

No.155

The cut plastic

Polymer compound, cut flake of molded plastic

Time:00:24 Update:Apr 5, 2010

Calcium oxide

No.154

Calcium oxide

Hygroscopic property and heat building by addition of water

Time:00:35 Update:Mar 25, 2010

Introducing Circle Feeder<SUP>®</SUP> with special specification

No.153

Introducing Circle Feeder® with special specification

CF-200TSR

Time:00:20 Update:Mar 3, 2010

Kaolin

No.152

Kaolin

It is used for rubber, plastic, and wider use.

Time:00:28 Update:Feb 10, 2010

Silica

No.151

Silica

It is used in wide variety of the field including paint, drug, and cosmetic.

Time:00:33 Update:Jan 26, 2010

Moist Carbon

No.150

Moist Carbon

Recyclable and versatile material

Time:00:27 Update:Jan 6, 2010

Silver powder

No.149

Silver powder

Heavy bulk density:3.5t/m3

Time:00:27 Update:Dec 24, 2009

Anhydrite

No.148

Anhydrite

A kind of mineral

Time:00:27 Update:Dec 1, 2009

Feeding test with aluminum powder

No.147

Feeding test with aluminum powder

Powder with high bulk density

Time:00:28 Update:Nov 5, 2009

Discharge test with biomass fine wood powder.

No.146

Discharge test with biomass fine wood powder.

Fine wood powder has high demand for biomass energy.

Time:00:24 Update:Oct 20, 2009

Discharge test with Copper powder

No.145

Discharge test with Copper powder

Heavy bulk density with high angle of repose

Time:00:25 Update:Oct 5, 2009

Discharge test with organic sludge

No.144

Discharge test with organic sludge

Clayey which mixed massive form

Time:00:28 Update:Sep 21, 2009

Discharge test with strong compacted property of starch

No.143

Discharge test with strong compacted property of starch

It is important preventing segregation in food.

Time:00:25 Update:Sep 7, 2009

Feed of fine salt with small quantity

No.142

Feed of fine salt with small quantity

Discharge test with the DF (delta)

Time:00:20 Update:Aug 20, 2009

It performs high accuracy feeding of woody pellets and chips

No.141

It performs high accuracy feeding of woody pellets and chips

Having environmentally large expectation for eco-fuel

Time:00:29 Update:Aug 5, 2009

Pneumatic activated residual discharge device instruction

No.140

Pneumatic activated residual discharge device instruction

Minimize the loss of materials

Time:00:14 Update:Jul 20, 2009

Strong jet characteristic with easily air fluidized material

No.139

Strong jet characteristic with easily air fluidized material

Discharge test with Portland cement

Time:00:26 Update:Jul 6, 2009

Special specification of the Circle Feeder<SUP>®</SUP> introduction

No.138

Special specification of the Circle Feeder® introduction

6 ports discharge with automatic slide chute

Time:00:19 Update:Jun 22, 2009

High accurate feeding with wooden chip

No.137

High accurate feeding with wooden chip

Biomass power generation in high demand

Time:00:16 Update:Jun 5, 2009

Hand truck type of the Circle Feeder<SUP>®</SUP>

No.136

Hand truck type of the Circle Feeder®

CF-700BS

Time:00:22 Update:May 21, 2009

Discharge test with pellets

No.135

Discharge test with pellets

CF-700BS

Time:00:19 Update:Apr 20, 2009

Discharge test with silicon carbide

No.134

Discharge test with silicon carbide

CF-300S

Time:00:16 Update:Apr 6, 2009

Smallest model of the Circle Feeder<SUP>®</SUP> Introduction

No.133

Smallest model of the Circle Feeder® Introduction

CF-200ASR

Time:00:20 Update:Mar 23, 2009

Discharge test with oxidized compound

No.132

Discharge test with oxidized compound

Strong bridging properties with powder

Time:00:30 Update:Mar 5, 2009

Large size slide gate introduction

No.131

Large size slide gate introduction

Special specification slide gate

Time:00:18 Update:Feb 20, 2009

Discharge test with lime sludge

No.130

Discharge test with lime sludge

It is difficult to handle and store sludgy material.

Time:00:22 Update:Feb 10, 2009

Discharge test with Coal

No.129

Discharge test with Coal

High corrosion wear with sulfur

Time:00:18 Update:Jan 20, 2009

High moisture with adhesive material

No.128

High moisture with adhesive material

Test with Tea chaff (mixed various kind)

Time:00:20 Update:Dec 25, 2008

For reduction of residual material in the feeder

No.127

For reduction of residual material in the feeder

Residual Discharge Device introduction

Time:00:25 Update:Dec 10, 2008

Feed rate increased specification

No.126

Feed rate increased specification

Automatic potato steamer AST-100

Time:00:11 Update:Nov 20, 2008

Requiring for prevention of abrasion and corrosion

No.125

Requiring for prevention of abrasion and corrosion

Introduction of subjective basis of specification for powder contact section

Time:00:12 Update:Nov 5, 2008

Compact, Uniform-Rate Powder Feeder (Mini-Ace)

No.124

Compact, Uniform-Rate Powder Feeder (Mini-Ace)

Discharge test with rice

Time:00:13 Update:Oct 28, 2008

Automatic lift up/down for cleaning improvement

No.123

Automatic lift up/down for cleaning improvement

Bottom panel automatic lift up/down type of large CF

Time:00:34 Update:Oct 10, 2008

Not waste material

No.122

Not waste material

DS:Disk Feeder

Time:00:32 Update:Sep 23, 2008

Prevent retention with mass flow

No.121

Prevent retention with mass flow

Feeding test for high-polymer coagulant

Time:00:36 Update:Sep 11, 2008

Bioethanol related material

No.120

Bioethanol related material

Discharge test with wood that contain lignin powder

Time:00:32 Update:Aug 20, 2008

Biofuel take center stage

No.119

Biofuel take center stage

Discharge test with bagasse

Time:00:38 Update:Aug 6, 2008

Free-flow material with fine powder

No.118

Free-flow material with fine powder

Discharge test with PVB

Time:00:33 Update:Jul 24, 2008

Feeder available for extremely small quantities

No.117

Feeder available for extremely small quantities

Compact, Uniform-rate feeder series

Time:00:39 Update:Jul 11, 2008

Feed control ratio of 1:100

No.116

Feed control ratio of 1:100

Wide range of moter speed control is realized

Time:00:18 Update:Jun 23, 2008

Discharge test with iron dust

No.115

Discharge test with iron dust

Heavy bulk density with easily bridged material

Time:00:28 Update:Jun 9, 2008

Discharge test with silica dehydrated cake

No.114

Discharge test with silica dehydrated cake

Easily compacted material with high moisture

Time:00:29 Update:May 9, 2008

Discharge test with Delta

No.113

Discharge test with Delta

Fine powder with heavy bulk density: Magnet powder

Time:00:24 Update:Apr 22, 2008

It permits discharging of 1gram per hour.

No.112

It permits discharging of 1gram per hour.

Development of feeder available for extremely small quantity

Time:00:34 Update:Apr 5, 2008

Discharge test with chipped PSP

No.111

Discharge test with chipped PSP

High demand for recycling

Time:00:23 Update:Mar 20, 2008

Stable discharge of fibrous polypropylene

No.110

Stable discharge of fibrous polypropylene

Easily twisted and bridged with light material

Time:00:22 Update:Mar 5, 2008

YOSHIKAWA Loss-in-weight system

No.109

YOSHIKAWA Loss-in-weight system

Measuring system introduction

Time:00:25 Update:Feb 21, 2008

Multiple discharging with the Circle Feeder

No.108

Multiple discharging with the Circle Feeder

CF-1000AS

Time:00:25 Update:Feb 5, 2008

Cornstarch discharge test with the CF Σ-500BS

No.107

Cornstarch discharge test with the CF Σ-500BS

Σ-500BS

Time:00:25 Update:Jan 22, 2008

Special specification: With swivel function

No.106

Special specification: With swivel function

Sanitary type: CS-600-DH

Time:00:21 Update:Dec 20, 2007

Shochu (clean distilled spirit) factory

No.105

Shochu (clean distilled spirit) factory

Continuous steaming and cooling of sweet potato facility: STMAC50

Time:00:22 Update:Dec 10, 2007

Discharge test with boracic acid

No.104

Discharge test with boracic acid

Strong cohesive properties

Time:00:23 Update:Nov 20, 2007

Easy assembly and disassembly type of the CF

No.103

Easy assembly and disassembly type of the CF

Advance of cleaning

Time:00:28 Update:Nov 5, 2007

Increasing the demand for the Circle Feeder with casing lift type.

No.102

Increasing the demand for the Circle Feeder with casing lift type.

For prevention of contamination

Time:00:26 Update:Oct 20, 2007

Discharge test with spherical-shaped fertilizer

No.101

Discharge test with spherical-shaped fertilizer

CF-300T

Time:00:28 Update:Oct 5, 2007

Significant cost-down for overseas transportation

No.100

Significant cost-down for overseas transportation

Shipment of divided CF and erection at site (knock down system)

Time:00:19 Update:Sep 20, 2007

Discharge test with Teflon powder

No.99

Discharge test with Teflon powder

Easily compacted material

Time:00:28 Update:Sep 5, 2007

Discharge test with chlorine dust

No.98

Discharge test with chlorine dust

Difficult to handle material that exhibits adhesion forces and strong bridging properties.

Time:00:21 Update:Aug 20, 2007

CF Σ-700

No.97

CF Σ-700

Uniform-rate feeder for fly ash with strong fluidized properties.

Time:00:14 Update:Aug 5, 2007

Discharge test with ceramic powder

No.96

Discharge test with ceramic powder

Easily compacted material

Time:00:22 Update:Jul 20, 2007

Fully Automatic Potato Steamer: AST

No.95

Fully Automatic Potato Steamer: AST

Operating conditions of the

Time:00:23 Update:Jul 5, 2007

Good reputation! Slide gate valve.

No.94

Good reputation! Slide gate valve.

Smooth and reliable open/close operation.

Time:00:28 Update:Aug 19, 2007

Try our discharge test system.

No.93

Try our discharge test system.

Do you have a bridging, segregation and any other problems after installation the equipment?

Time:00:22 Update:Jun 5, 2007

Suitable equipment for feeding without causing segregation.

No.92

Suitable equipment for feeding without causing segregation.

Improvement in quality by Mass Flow.

Time:00:36 Update:May 20, 2007

Special design of the Disk Feeder eliminates vibration !

No.91

Special design of the Disk Feeder eliminates vibration !

Wide range of applications for powder, granular and bulky materials.

Time:00:20 Update:May 5, 2007

Discharge test with filter cake of silica.

No.89

Discharge test with filter cake of silica.

Perfect discharge with no bridge!

Time:00:23 Update:Apr 5, 2007

Sorry, Japanese only

No.88

Sorry, Japanese only

Sorry, Japanese only

Time:00:13 Update:Mar 20, 2007

Renewal of the CF-Σ(Sigma)

No.87

Renewal of the CF-Σ(Sigma)

Improved clean-ability and maintenance-ability.

Time:00:15 Update:Mar 5, 2007

High bridging properties (water containing): Sawdust.

No.86

High bridging properties (water containing): Sawdust.

Confirmation of discharge properties and bridging.

Time:00:22 Update:Feb 20, 2007

Discharge test with clay

No.85

Discharge test with clay

Lumpy material with strong adhesive properties.

Time:00:26 Update:Feb 5, 2007

Circle Feeder best selection.

No.84

Circle Feeder best selection.

Time:00:17 Update:Jan 20, 2007

Feeding System For Waste Plastic.

No.82

Feeding System For Waste Plastic.

Suitable for discharge of amorphous industrial wastes with high accuracy.

Time:00:23 Update:Dec 20, 2006

Circle Feeder for Exhibition version

No.81

Circle Feeder for Exhibition version

Easily understand the features and principles.

Time:00:23 Update:Dec 5, 2006

Special weigh-in Circle Feeder

No.80

Special weigh-in Circle Feeder

CF-500TS

Time:00:25 Update:Nov 20, 2006

Special Specifications YPD-60PT

No.79

Special Specifications YPD-60PT

YPD is effective for cost reduction.

Time:00:20 Update:Nov 5, 2006

Discharge test with humid coke

No.78

Discharge test with humid coke

Measure to prevent bridging with the Circle Feeder

Time:00:22 Update:Oct 20, 2006

Polymer Dissolution System

No.77

Polymer Dissolution System

Renewal YPD with high reputation.

Time:00:20 Update:Oct 5, 2006

Titanium dioxide

No.76

Titanium dioxide

Difficult to handle material.

Time:00:30 Update:Sep 20, 2006

Special feature on the CF Sigma !

No.75

Special feature on the CF Sigma !

Combination of a Circle Feeder and a unique volumetric feeder.

Time:00:35 Update:Sep 5, 2006

Discharge test with plastic powder

No.74

Discharge test with plastic powder

CF-300BS

Time:00:25 Update:Aug 20, 2006

Largest size of the Circle Feeder

No.73

Largest size of the Circle Feeder

CF-4000BS-CP

Time:00:21 Update:Aug 5, 2006

RPF (Refuse Paper and Plastic Fuel)

No.72

RPF (Refuse Paper and Plastic Fuel)

Confirmation of the feed rate and the bridging.

Time:00:25 Update:Jul 20, 2006

Discharge test with granulated fertilizer

No.71

Discharge test with granulated fertilizer

Effective for preventing segregation.

Time:00:25 Update:Jul 5, 2006

Discharge confirmation of pulverized synthetic papers

No.70

Discharge confirmation of pulverized synthetic papers

Discharge confirmation test

Time:00:27 Update:Jun 20, 2006

Heat-resistant Circle Feeder

No.68

Heat-resistant Circle Feeder

Center shaft reducer, water-cooled mount.

Time:00:11 Update:May 20, 2006

Discharging of the wet activated carbon

No.67

Discharging of the wet activated carbon

Hard to handle materials with stable discharging which have strong fastness and cohesive properties.

Time:00:19 Update:May 5, 2006

The CF Sigma with the slide gate

No.66

The CF Sigma with the slide gate

A combination of the CF Sigma with a manual slide gate (easy open/close type).

Time:00:15 Update:Apr 20, 2006

A stable discharge system for industrial wastes

No.65

A stable discharge system for industrial wastes

Suitable for difficult to handle materials such as industrial wastes

Time:00:27 Update:Apr 5, 2006

Discharge test of glass wool with the Circle Feeder

No.64

Discharge test of glass wool with the Circle Feeder

The material has difficult handling properties.

Time:00:21 Update:Mar 20, 2006

Calcium hydroxide

No.63

Calcium hydroxide

Batch weighing test

Time:00:20 Update:Mar 5, 2006

Discharge test with Disk Feeder

No.62

Discharge test with Disk Feeder

Processed pet food

Time:00:21 Update:Feb 20, 2006

High precision feeder Σ

No.61

High precision feeder Σ

Fine powder with water content of approx. 20 percent.

Time:00:20 Update:Jan 20, 2006

Next-generation of vegetable steamer

No.60

Next-generation of vegetable steamer

Automatic batch type steamer

Time:00:28 Update:Jan 5, 2006

Descharge test with Resin pellet

No.59

Descharge test with Resin pellet

Discharge test with Σ-300

Time:00:20 Update:Nov 12, 2007

Special specification of the Circle Feeder

No.58

Special specification of the Circle Feeder

Simultaneous discharge from two ports at different feed rates.

Time:00:20 Update:Dec 5, 2005

Discharge condition of a Pulverized RPF(plastic waste etc.,)

No.57

Discharge condition of a Pulverized RPF(plastic waste etc.,)

Flow Leveler(pulsation leveling equipment)

Time:00:20 Update:Nov 20, 2005

Discharge test of a fine and fibrous bamboo powder

No.56

Discharge test of a fine and fibrous bamboo powder

Hard to handle material

Time:00:17 Update:Nov 5, 2005

The rotary actuated leveler

No.55

The rotary actuated leveler

Make uniform surface for the material in the hopper by the rotary actuated leveler.

Time:00:09 Update:Oct 20, 2005

Discharge system for industrial waste

No.54

Discharge system for industrial waste

YOSHIKAWA\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'S

Time:00:37 Update:Oct 5, 2005

Bad fluidity silica

No.53

Bad fluidity silica

Test with the CF-Σ(Sister product of the Circle Feeder).

Time:00:23 Update:Sep 20, 2005

Pulverized container bag mixed with metal pieces

No.52

Pulverized container bag mixed with metal pieces

Confirmation of stable discharge condition by the Loop feeder.

Time:00:17 Update:Sep 5, 2005

Discharge test of palm fiber

No.51

Discharge test of palm fiber

The Circle Feeder is suitable equipment for easily twisted properties in fibrous material.

Time:00:18 Update:Aug 20, 2005

Development of a stable discharge system for handling waste plastic with CF.

No.50

Development of a stable discharge system for handling waste plastic with CF.

For higher accuracy and even discharge to a waste plastic facility.

Time:00:19 Update:Aug 5, 2005

Magnesium nitrate

No.49

Magnesium nitrate

Confirmation of the discharge condition and feed rate. Confirmation test for accurate batch measuring.

Time:00:18 Update:Jul 20, 2005

Sorry, Japanese only

No.48

Sorry, Japanese only

Sorry, Japanese only

Time:00:11 Update:Jun 29, 2005

Dried tea leaves

No.47

Dried tea leaves

New facility planning. Confirmation of accuracy and the bridging of the dried tea leaves.

Time:00:18 Update:Jun 14, 2005

Container Unit

No.46

Container Unit

Time:00:15 Update:May 31, 2005

Stable discharge of polypropylene fiber

No.45

Stable discharge of polypropylene fiber

The Circle Feeder keeps stable discharge of material with 15mm long fiber. Recieved the test requisition with the Circle Feeder.

Time:00:18 Update:May 20, 2005

The equipment has wide range of functions from steaming to cooling

No.44

The equipment has wide range of functions from steaming to cooling

Introduction of a vegetable steamer to a distillery.

Time:00:20 Update:Apr 29, 2005

Gypsum

No.43

Gypsum

The Circle Feeder permits feeding of lumpy materials that are easily broken by hand. The rotation of the rotary vanes break the large lumps prior to discharge.

Time:00:15 Update:Apr 20, 2005

Prevention of residual material by air-blowing device

No.42

Prevention of residual material by air-blowing device

Used to prevent cross-contamination and loss of product

Time:00:10 Update:Apr 5, 2005

Feeding Industrial wastes

No.41

Feeding Industrial wastes

Stable feeding of mixe rubbish(plastic, rubber,suponge, piece of metal, vynl, wire, etc).

Time:00:13 Update:Mar 20, 2005

CF-Σ High Precision Volmetric Feeder

No.40

CF-Σ High Precision Volmetric Feeder

Combination of the discharge condition, feed rate and accuracy. It permits accurate feeding of materials that are easily fluidized.

Time:00:15 Update:Mar 5, 2005

FRP(Fiber Reinforced Plastic) discharge test

No.39

FRP(Fiber Reinforced Plastic) discharge test

Purpose of the test: Combination of the discharge condition, feed rate and accuracy.

Time:00:19 Update:Feb 20, 2005

Discharge test of Plastic waste

No.38

Discharge test of Plastic waste

Test background: Bridge problem( Wedge hopper with a Screw feeder)

Time:00:15 Update:Feb 5, 2005

Discharge test of RFP with the Circle Feeder

No.37

Discharge test of RFP with the Circle Feeder

Detail of the test requisition:Solving the bridge problem around the conical part.

Time:00:15 Update:Jan 20, 2005

Loop Feeder

No.36

Loop Feeder

Suitable for hard to handle materials. It keeps stable discharge amorphous materials.

Time:00:16 Update:Dec 20, 2004

Easy to clean(Sanitary Type Circle Feeder)

No.35

Easy to clean(Sanitary Type Circle Feeder)

Suitable for chemical, food, pharmaceutical and other clean room applications.

Time:00:11 Update:Dec 5, 2004

Delta Compact, Uniform-Rate Powder Feeder

No.34

Delta Compact, Uniform-Rate Powder Feeder

Example of handling material; abrasive powder. food additive

Time:00:10 Update:Nov 20, 2004

Discharge test of PTFE

No.33

Discharge test of PTFE

The material that has cohesive and adhesive properties is discharged without shearing and lumping.

Time:00:10 Update:Nov 5, 2004

What is the Disk Feeder?

No.32

What is the Disk Feeder?

The Disk Feeder is equipped with the Circle Feeder\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

Time:00:10 Update:Oct 25, 2004

Uniform rate feeding of Abradign agent

No.31

Uniform rate feeding of Abradign agent

Uniform rate feeding of heavily abrasive material with large bulk density is realized.

Time:00:10 Update:Oct 15, 2004

Discharging plastic wastes with the high degree of accuracy

No.30

Discharging plastic wastes with the high degree of accuracy

It makes possible to feed unstable flow ofplastic wastes with high degree of accuracy.

Time:00:16 Update:Oct 5, 2004

Residual Discharge Device

No.29

Residual Discharge Device

It is device to discharge as much residual material possible from the feeder.

Time:00:14 Update:Sep 25, 2004

Stable and precise feeding of toner powder

No.28

Stable and precise feeding of toner powder

Deviation ±1% has confirmed.(each sampling is done for 10 seconds)

Time:00:13 Update:Sep 15, 2004

MINI-ACE(MA)Compact, Uniform-Rate Powder Feeder

No.27

MINI-ACE(MA)Compact, Uniform-Rate Powder Feeder

It is for powder materials that are usually difficult to discharge,at a very low rate and small quantity.

Time:00:11 Update:Sep 5, 2004

Discharging high viscosity material

No.26

Discharging high viscosity material

Easy to discharge clayey material with high moisture content

Time:00:14 Update:Aug 25, 2004

Sorry, Japanese only

No.25

Sorry, Japanese only

Sorry, Japanese only

Time:00:20 Update:Aug 15, 2004

Circle feeder can solve segregation

No.24

Circle feeder can solve segregation

Mass Flow (first-in-first-out) is a main characteristic of the Circle Feeder.

Time:00:26 Update:Aug 5, 2004

High polymer dissolution system N-type

No.23

High polymer dissolution system N-type

High polymer dissolution system reference Two CF\'s for anionic and cationic systems, in one unit are delivered.

Time:00:12 Update:Jul 25, 2004

Discharge principle of Circle Feeder

No.22

Discharge principle of Circle Feeder

Basic discharge principle of Circle Feeder is plainly explained with video clips and comments.

Time:00:24 Update:Jul 15, 2004

Feeding waste plastic

No.21

Feeding waste plastic

Incineration deregulation from the Ministry of Environment led the number of sales inquiries and test requests increase.

Time:00:22 Update:Jul 5, 2004

2 discharge port are effective for general purposes at any types of facilities

No.20

2 discharge port are effective for general purposes at any types of facilities

At garbage incineration plants it is relatively difficult to discharge fly ash from a silo. The Circle Feeder with multiple discharge ports makes the fly ash handling easy.

Time:00:15 Update:Jun 25, 2004

Circle feeder with specifications for Shochu brewery companies

No.19

Circle feeder with specifications for Shochu brewery companies

Shochu(a clear distilled liquor) fever leads Shochu brewery companies to place new orders for Circle Feeder for their production facility.

Time:00:20 Update:Jun 15, 2004

Free from pulsation and uniform-rate with batch measuring system

No.18

Free from pulsation and uniform-rate with batch measuring system

Testing with Y-ACE where a high accuracy is required with metered feeding.

Time:00:18 Update:Jun 5, 2004

Circle Feeder with a large diameter

No.17

Circle Feeder with a large diameter

Proven applications,prevention of bridging with mass flow discharging, for storing and feeding food materials under the low temperature of (23°F).

Time:00:16 Update:May 25, 2004

Proven applications for hard-to-discharge materials Loop Feeder

No.16

Proven applications for hard-to-discharge materials Loop Feeder

Loop Feeder can stably discharge Tire Chip that is usually difficult to be discharged

Time:00:20 Update:May 17, 2004

Contamination-free application recommended for pharmaceutical industry.

No.15

Contamination-free application recommended for pharmaceutical industry.

Effortless cleaning using a manual lift to cope with contamination. Feedable from 2 exhaust ports.

Time:00:19 Update:May 5, 2004

Stable pneumatic transportation with ejector

No.14

Stable pneumatic transportation with ejector

Applications exclusively for pneumatic transportation by use of an ejector.The equipment is ideal for pneumatic transportation of very small quantity.

Time:00:17 Update:Apr 25, 2004

Feeding wood-chips

No.13

Feeding wood-chips

Information on increasing number or inquiries recently on biomas related materials and wood-chips and requests testing.

Time:00:17 Update:Apr 15, 2004

Special specifications with a large diameter,CF-Σ

No.12

Special specifications with a large diameter,CF-Σ

Customized specification with an inlet diameter of 2200mm. (CF-Σ Standerd specification is up to 1000mm)

Time:00:17 Update:Apr 5, 2004

Circle Feedeer with a manually operated lift and a scale

No.11

Circle Feedeer with a manually operated lift and a scale

Up-and-down movement is possible with a manually operated lift further along with a scale.

Time:00:15 Update:Mar 25, 2004

Sorry, Japanese only

No.10

Sorry, Japanese only

Sorry, Japanese only

Time:00:18 Update:Mar 15, 2004

Save the total cost with limited heat-resistant temperture

No.9

Save the total cost with limited heat-resistant temperture

Heat-resistant specifications under 220°C(428°F) specifically for dust-collecter.

Time:00:11 Update:Mar 5, 2004

Prevent free-flowability with the specific feeder

No.8

Prevent free-flowability with the specific feeder

CF-Σ made it possible to discharge materials of high free-flowability such as flyash.

Time:00:17 Update:Feb 25, 2004

Testing the material with high moisture

No.7

Testing the material with high moisture

Materials that the specific feeder need to be for.

Time:00:18 Update:Feb 15, 2004

Application for Incineration Ash

No.6

Application for Incineration Ash

Loop Feeder + heat resistant system realizes to discharge incineration ash.

Time:00:15 Update:Feb 5, 2004

CF + Σloss-in-weight system

No.4

CF + Σloss-in-weight system

CIRCLE FEEDER + Σ realizes a high level of loss-in-weight system.

Time:00:17 Update:Jan 15, 2004

Application for Pressure-Tight Process

No.3

Application for Pressure-Tight Process

Maximum pressure 0.6Mpa ( 6.0 bar )

Time:00:13 Update:Dec 25, 2003

Discharging Industrial Waste Materials

No.2

Discharging Industrial Waste Materials

Loop Feeder can do the job successfully.

Time:00:17 Update:Dec 15, 2003

Electric Lift Type

No.1

Electric Lift Type

Adopted with equipment by high flush frequency.

Time:00:22 Update:Dec 5, 2003