CFD
Specialized type for dust collectors. Upper temperature limit: 900 degrees C
You will be no longer worried about clogging in a dust collector !!
- Low cost type of discharger with limited specifications and usage.
- Light-weight and compact in construction with reduced height.
- Eliminate bridging thanks to a unique principle and technology of discharging.
- Less drive power and cost saving.
If you have currently problems like clogging or height of the system, here is a quick solution that is possible with " D Series".
Standard specifications: N type for material temperature under 80 degrees Celsius. Heat resistant air cooled: HA type for material temp. under 250 deg. C. Heat resistant water cooled: HW type for material temp. under 360 deg. C.
specification
| Model | CFD-1000 | ～ | CFD-2400 |
|---|---|---|---|
| Designed feed rate (m3/h) | 6.0 ～ | ※ | ～ 12 |
| Approximate weight (kg) | 300 | 1350 | |
| Heat resistant specification | N type | N / HA / HW |
※CFD-1200/1400/1600/1800/2000/2200 type are also available.
- Specifications are subject to change for improvement or from necessity of properties of material.
- Above mentioned capability is based on height of dust collected in a hopper at 0.5 meter.
- Rotary valves, dumper and others must be equipped to insulate heat from the discharger.
- Heat resistant specifications more than 360 degrees Celsius with water cooling is also available.
